ZQ-R Series is the most stable two-step fully automatic pet stretch blow molding machine. It has four cavities and the maximum capacity of the products is 1.5L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc. High capability/price ratio PET processing machines are praised as reliable products by our customers. The automatic blowing machine series have powerful productivity but with very reasonalbe price
Features: 1.Rotary blowing method with high efficiency and output speed to reach 99.5% productivity 2.SIEMENS electric control system with quick action and high accuracy 3.German imported air-valve, cylinder, SEW brand motor and trequency-transfer applied to keep stable operation and stretch 4.Quick mould exchanging system makes mould changing easily 5.Professionally designed robot sends preform and takes bottle out automatically and accurately 6.PHILIPS infrared ray lamps with automatic feedback compensation applied in heating system for bearing of heat and keeping heating steady
Settings: a).PLC colour display: SIEMENS (GERMANY) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor National(JAPAN) d).Other electric parts are all world-famous brand
Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Easy installation and starting O. Low rejection rate: less than 0.2 percent.
ZQ-D series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to four cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization 2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it. 3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality. 4).High Speed:2500BPH(4-cavity) 3800BPH(4-cavity). 5).No Contamination:Closed production zone, good self-lubrication system avoid contamination. 6).Low Cost:Low consumption of electricity, air and water. 7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Settings: a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor National(JAPAN) d).Other electric parts are all world-famous brand
Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Easy installation and starting O. Low rejection rate: less than 0.2 percent.
High Speed PET Blow Moulding Systems - Linear Type
ZQ-B series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to two cavities and the maximum capacity of the products is 0.6L and 1.5L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization 2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it. 3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality. 4).High Speed:1400BPH(1-cavity) 2000BPH(2-cavity). 5).No Contamination:Closed production zone, good self-lubrication system avoid contamination. 6).Low Cost:Low consumption of electricity, air and water. 7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Settings: a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor National(JAPAN) d).Other electric parts are all world-famous brand
Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Easy installation and starting O. Low rejection rate: less than 0.2 percent.
ZQ-A series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,1.5L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc. Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can’t transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
Settings: a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor National(JAPAN) d).Other electric parts are all world-famous brand
Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Easy installation and starting O. Low rejection rate: less than 0.2 percent.
ZQ22-III semi-automatic stretch blow moulding machine has been improved on the base of ZQ22-II, designed by CE standard. With microcomputer controlling system, it controls various technical parameter needed more accurately and more steadily. Only one person without special training operates it more easily and more safely. ZQ22-III is fit to blow carbonated beverage bottles, mineral water bottles, cosmetics bottles and hot-filling bottles.
Features: 1. Produce bottle from 0.1L to 3L(2 cavity) 2. Output capacity up to 900 for 0.6L using two-cavity blow mold 3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second 4. Equipped with special designed air storage unit 5. Using Infrared preform heater 6. Independent Temperature Control for different heating lamp to get ideal preform heating results 7. Heating lamps are adjustable in directions to suit various preforms. 8. Operated only by one person without special training. 9. Simple installation & startup adjustment. 10.Waste rate of finished bottle is less than 0.2%.
ZQ22-III-D semi-automatic stretch blow molding machine has been improved on the base of ZQ22-III, designed by CE standard. With microcomputer controlling system, it controls various technical parameter needed more accurately and more steadily. After improving technology, the PET bottles can resisted high temperature 98degree and solve the package of traditional food and drink.Only one person without special training operates it more easily and more safely. ZQ22-III-D is fit to blow hot-filling bottles.
ZQ22-III-E semi-automatic stretch blow molding machine has been improved on the base of ZQ22-III, designed by CE standard. With microcomputer controlling system, it controls various technical parameter needed more accurately and more steadily. After improving technology, the pp or bopp bottles can resisted high temperature 98℃ and solve the package of traditional food and drink.Only one person without special training operates it more easily and more safely.
ZQ22-III-E is fit to blow pp or bopp high temperature resistant bottles.
ZQ22-IV Semi-Automatic blow molding machine are the most cost-effective solution for mass production of jars and bottles for small and medium scale factories. The machines are also designed for the production of big jars and containers with volumes up to 0.1-12 liters.
